Home : About Us : Roof Trusses : Products : Contact Us : Index : Disclaimer : 

Kelbrick's (Pty) Ltd.   TA

 Kelbrick's Roof Trusses

STANDARD CONDITIONS OF SALE. ANNEXURE TO MAIN QUOTATION.

SPECIFICATIONS IN OUR OFFER:

1. TILTING BATTENS TO BE 38x 50 mm PAR NOT SPLAY CUT  (UNLESS OTHER WISE SHOWN).

2. OUR OFFER IS BASED ON ONE DELIVERY FOR THE ENTIRE CONTRACT.

3. IT IS ASSUMED THAT GEYSERS ARE TO BE SUPPORTED ON INTERNAL WALLS AND NOT ON TRUSSES UNLESS OTHERWISE AGREED IN WRITING.  IF GEYSERS ARE TO BE SUPPORTED ON TRUSSES, USE THE STANDARD DETAIL AS PER MITEK BRACING DETAILS, DETAIL – GT. FURTHERMORE, NO ADDITIONAL LOADS HAVE BEEN ALLOWED FOR, I.E. WATER PIPING, AIR CONDITIONING, DUCTING ETC.

4. ANY SUPPORTING BEAMS HAVE BEEN DESIGNED BY OURSELVES AND WE GUARANTEE THAT THIS SIZE IS ADEQUATE TO CARRY THE LOAD FOR WHICH IT WAS DESIGNED.  HOWEVER, SHOULD YOU WISH TO CHANGE THIS TO THE SIZE SHOWN ON THE ARCHITECT DRAWINGS, PLEASE FEEL FREE TO DO SO AND LET US KNOW IN ORDER THAT WE CAN AMEND THE OFFER.

5. ALL REQUIRED PERMANENT BRACING IS INCLUDED IN THE OFFER. HOWEVER ANY TEMPORARY BRACING REQUIRED FOR ERECTION IS EXCLUDED AND THIS IS TO BE SUPPLIED THE MAIN CONTRACTOR/ERECTOR.  WHERE ERECTION IS PART OF THIS OFFER ALL TEMPORARY BRACING IS INCLUDED IN OUR OFFER.

6. WHERE A SAVING OF ONE TRUSS CAN BE MADE, TRUSSES HAVE BEEN SPACED A MAXIMUM OF 150 mm AWAY FROM THE GABLES.

7. ALL TIMBER IS TO SABS QUALITY. TIMBER SIZES USED FOR TRUSSES IN OUR OFFER Is 38 x 50 mm MINIMUM AND 38 x 228 MAXIMUM.

8. WE MAKE USE OF MITEK SA (PTY) LTD DESIGNING PROGRAMS, WRITTEN BY PROFESSIONAL ENGINEERS. IF REQUIRED, PROPER SIGNED ENGINEERS DRAWING'S CAN BE SUBMITTED TO YOU, PRIOR MANUFACTURE, FOR APPROVAL BY YOURSELF FOR A SMALL FEE. NO PROVISION HAS BEEN MADE FOR SITE INSPECTIONS BY OUR ENGINEERS. IF ANY SITE INSPECTIONS ARE REQUIRED PLEASE INFORM US IN WRITING SO THAT WE CAN AMEND OUR OFFER. ON REQUEST A WRITTEN GUARANTEE FOR THE DESIGN AND MANUFACTURE OF THE ENGINEERED ROOF TRUSSES WILL BE SUPPLIED.

9. IT HAS BEEN ASSUMED THAT CEILING BRANDERINGS IS TO BE FIXED DIRECTLY TO THE UNDERSIDE OF THE TIE-BEAM, AND NOT SUSPENDED.

10. ROOF PITCH, BATTEN/ PURLIN SPACING. OVERHANG, ETC.  ARE AS STATED.  SCHEDULES AVAILABLE IF REQUIRED.

11. NO ADDITIONAL DEAD LOADS, APART FROM THE ROOF COVERING AND STANDARD 6 mm GYPSUM CEILING HAVE BEEN INCORPORATED IN OUR DESIGNS.  SHOULD THERE BE AIR CONDITIONING DUCTING, KITCHEN CANOPIES, SPRINKLER SYSTEMS ETC. REQUIRED, PLEASE LET US KNOW THAT WE CAN REDESIGN THE TRUSS AND AMEND OUR OFFER.

12. WATERPROOFING IS NOT INCLUDED IN OUR OFFER (UNLESS OTHERWISE SHOWN)

13. WE ESTIMATE THAT THE THEORETICAL QUANTITIES AS SPECIFIED ARE ADEQUATE TO COMPLETE EACH BUILDING AS PER THE DRAWINGS.  HOWEVER, WE CANNOT GUARANTEE THAT THE ERECTOR WILL NOT EXCEED THE PERCENTAGE WASTAGE ALLOWANCE, E.G.  BATTENS, PURLINS, BRACING & RUNNERS = 10%. WALL PLATES = 2.5%. CONCRETE TILES & FITTINGS = 3%.

14. OUR OFFER INCLUDES ALL STANDARD MITEK ECO TRUSS HANGERS FOR TIMBER-TO-TIMBER CONNECTIONS BUT EXCLUDES ANY PURPOSE MADE BRACKETS.

15. DELIVERY TO SITE WILL BE AS BUILDERS PROGRAM TO BE AGREED, IN WRITING BETWEEN US.

16. SHOULD OUR OFFER BE SUBJECT TO A SUBCONTRACT DOCUMENT, THERE WILL BE A SMALL CHARGE TO COVER COST OF PERFORMANCE GUARANTEE, LOSS OF INTEREST ON RETENTION MONEY, ETC.

17. IF YOU HAVE AN ACCOUNT WITH US, PAYMENT MUST BE IN 30 DAYS FROM STATEMENT NET, OTHERWISE FULL PAYMENT ON DATE OF ORDER.

18. WHERE ERECTION IS PART OF THIS OFFER IT IS ASSUMED THAT ANY NECESSARY SCAFFOLDING WILL BE SUPPLIED AND ERECTED BY THE MAIN CONTRACTOR AND IF THERE IS A CRANE ON SITE THEN IT WILL ASSIST IN THE HOISTING OF TRUSSES TO THE TOP SLAB.

KELBRICK'S ROOF TRUSSES

08 April 2008

Home : About Us : Roof Trusses : Products : Contact Us : Index : Disclaimer :

Kelbrick’s Roof Trusses, the first and only SABS approved timber roof truss manufacturer in South Africa. We manufacture and install. Our design office can design all shape and sizes of roof trusses; including attic trusses, exposed trusses, rafters, beams, floor beams. They will assist you in the planning of your new roof or the re-roofing of you building. All roofs are designed by using state-of-the-art designing software from MiTek Systems, developed and backed worldwide by Professional Structural Engineers and Programmers. All trusses fabricated and inspected at the factory under SABS 1900:2002, the ITC (Institute for Timber Construction) which overseas all industry activities which includes, Nail Plate Manufacturing, System certification, Truss Plant certification, training of designers, estimators, detailers, erectors, carpenters, inspections of completed roofs. Mayor system suppliers in the world: Mitek, Gang Nail, Hydro Nail, ITS, Alpine, Multinail, Pryda, TrussWal, Wolf. We supply a wide range of products which includes: SA structural pine, timber, wood, floor joists, floor beams, eco truss connecting products from mitek, hurricane clips, truss hanger, truss boots, heavy duty cleat, brackets, top and bottom cord bracing, t bracing, web bracing, brandering, batten (battens), wall plate, barge, fascia, board, tiles, tile, concrete  and clay tiles from: Brickor, Marley Roofing, Lafarge, Rooftile West Rand, Coverland, in the following profiles; Double Roman, Deep Roll Double Roman, Monarch, Mendip, Ludlow, Modern flat tile, Cupola, Elite, Marseille Clay Tile Range,  We deliver to Brits, Zoutpandsdrift, Mooinooi, Rustenburg, Northam, Pretoria, Centurion, Midrand, Johannesburg, Alberton, Benoni, Boksburg, Kemptonpark, Randburg, Roodepoort, Soweto, Krugersdorp, Kagiso, Randfontein, Westonaria, Thabazimbi, Ellisras, Potchefstroom, Mafekeng, Lichtenburg, Boons, Marico, Sun City, Warmbad, Naboomspruit, Potgietersrus, Pietersburg, Vaalwater, Nylstroom, Witbank, Bronkhorstspruit, Middelburg, Steelpoort, Marble Hall, Klerksdorp, Bloemfontein, Cape Town, Durban, Tshwane, Tswane, Gauteng, North West Province,  North, West, Province, Northern Province, Limpopo, South Africa, Suid-Afrika.